Fastening material

• The fastening material is supplied by Lichtgitter CZ for all types of gratings and for all commonly supplied and designed types of load-bearing structure profiles.
• For BZ profiles, the so-called “olive” is used as the upper part of the fastening element, which is seated in the profile eye.
• All screws and nuts are supplied in stainless steel design, or, like the other parts of the fastening material, in hot-dip galvanized finish.
• By bolting sheet metal profiles together (fastening material No. 27 and 29), we achieve a more favorable load distribution and prevent the formation of a trench edge.
• Each individual profile, or profiles bolted into elements wider than 300 mm, must be fastened to the steel structure at a minimum of four points. For widths less than 300 mm, two fastening elements are sufficient.
• All fastening elements must be periodically inspected, depending on the conditions of use, and the bolted joints retightened if necessary.

It is an element consisting of a bottom part, a countersunk head screw M8x… ISO 2009 (DIN 965), a square nut M8 DIN 557 and, for the BZ profile, the so-called “olive”.
The fastening element is intended for profile types BR, BP, BP-Ü, BZ and BN-O.

No. 22 is intended for sheet metal profiles placed on beams without a bottom flange (L profile) and consists of a lower hook, a countersunk head screw M8x… ISO 2009 (DIN 965) and, for the BZ profile, the so-called “olive”. The type of beam for which the element is to be used is specified in the order.
The fastening element is intended for profile types BR, BP, BP-Ü, BZ and BN-O.
No. 23 is the same as fastening element No. 22, but for beams with a bottom flange (U profile).

It prevents the formation of a trench edge at the profile joint and at the same time ensures a flawless connection of the profile to the load-bearing structure. It consists of a spacer profile, a countersunk head screw M8x… ISO 2009 (DIN 965), alternatively self-tapping countersunk head screws ISO 7050 (DIN 7982), washer 9 DIN 126, nut M8 ISO 7042 (DIN 980).
The fastening element is intended for profile types BN-O and BN-G.

It is used for fastening to the structure at the joint of two profiles, without the need to drill holes into the beam. It consists of two clamps, a threaded bar with three screws M8x … according to ISO 7050 (DIN 7982) and two olives (see element No. 32)
The fastening element is intended for profile types BR, BP, BP-Ü, BZ and BN-O.

It is an element consisting of an “S”-shaped hook, a countersunk head screw M8x… ISO 2009 (DIN 965) and, for the BZ profile, the so-called “olive”. It is suitable only for beams with flange thickness up to 9 mm.
The fastening element is intended for profile types BR, BP, BP-Ü and BZ.

It ensures a secure connection to the load-bearing structure; it consists of a countersunk head screw M8x… ISO 2009 (DIN 965), washer 9 DIN 126, nut M8 ISO 7042 (DIN 980) and, for the BZ profile, the so-called “olive”.
The fastening element is intended for profile types BR, BP, BP-Ü, BZ and BN-O.

In the case of unbolted parts, it prevents the formation of a trench edge over large spans and makes it possible to distribute the load. It consists of a connecting element and self-tapping countersunk head screws M5x20 DIN 7516D.
The fastening element is intended for profile types BR, BP, BP-Ü, BZ, BN-O and BN-G.

It prevents different deflection of loaded and unloaded profiles so that a trench edge greater than 4 mm does not occur. It consists of a spring steel clamp.
The fastening element is intended for profile type BZ.

By bolting sheet metal profiles together, we achieve a more favorable load distribution and prevent the formation of a trench edge. It consists of bolt M8x20 ISO 4017 (DIN 933), washer 9 DIN 126 and nut M8 ISO 7042 (DIN 980).
The fastening element is intended for profile types BR, BP, BP-Ü, BZ, BN-O and BN-G

It prevents the sheet metal profile from lifting. It consists of an angle bracket 30/30/3…50 mm long and two self-tapping screws M5x20 DIN 7516D.
The fastening element is intended for profile types BR, BP, BP-Ü, BZ, BN-O and BN-G.

It is suitable for connecting individual parts together and for limited load transfer. For this, bolts, washers, nuts and a splice plate with holes adapted to the profile are required.
The fastening element is intended for profile types BR, BP, BP-Ü, BZ, BN-O and BN-G.

The upper part of the fastening element for the BZ profile made of gray cast iron without surface treatment or plastic.

Using a suitable tightening torque, the profiles are pulled with the appropriate force to the structure. Thanks to this, they can transfer certain horizontal forces. It consists of a curved clip, bolt M12 x … ISO 4017 (DIN 933), washer 13 DIN 126 and self-locking nut M 12 ISO 7042 (DIN 980), alternatively steel structural bolts according to DIN 7990.
The fastening element is intended for profile types BR, BP, BP-Ü, BZ, BN-G and BN-O.